Products > Multifunction > Xcellence Dynamic
Xcellence Dynamic
New "three in one" remote control room designed for fluoroscopy, radiography and direct exposures with full +/- 90º degree rotation for unrestricted installation.
Features
Clinical use
Technical Specifications
Related Products
Features
Features
- 3-in-1 solution: Equipment designed for general radiography and continuous or pulsed fluoroscopy in adults, children or infants.
- Fully remote controllable system
- Motorized tilting ± 90°.
- It will optimize image quality with reduced patient dose.
- Maximum patient coverage (head-to-foot) of 2.5m without the need for patient repositioning.
- Generator power from 50kW to 80kW.
- Digital detector prepared to perform radiographic, digital/cinema and fluoroscopic examinations.
- System management includes image processing, temporary archiving on the hard disk, sending images over the network.
- Automatic Stitching software for installation on the acquisition or display console
Clinical Use
- Positioning fluoroscopy.
- Dynamic examinations: esophagus, EGD, barium enema, etc.
- Urogenital Tract Examinations: Nephro, Urography, Cystography, etc.
- DSA Angiography: Road mapping, landmarking, pixel shift, remasking mask superposition (optional).
- Interventional radiology.
- Hysterosalpingography
- Arthrography
- X-ray: Skull, thorax, abdomen, spine and pelvis, osteo-articular, extremities, tomography, stitching/telemetry (optional).
- Direct projections: Extremities, pediatrics, lateral projections, stretcher radiography, imaging of patients with limited mobility.
Technical Specifications
Column / table
Motorized table tilting
90°. Speed at 6° /s
Tube rotation
± 180°
(SID Min-Max) Motorized DFP
110cm - 180cm
Motorized column angulation
± 40°
Collimator
Automatic and Motorized with led and laser light
Collimander rotation (manual)
±45º (optional)
Motorized detector longitudinal movement
Motorized detector longitudinal movement
Detector rotation (vertical/horizontal)
(40°/s)
Overall dimensions and weight
226 x 235 x 189 cm, 1600Kg. (In horizontal position, minimum height, minimum SID, column 0º)
Board Dimensions
225 x 81 cm
Vertical movement of table top (variable height) Motorized
From 38 to 148cm, speed 6cm/s
Longitudinal movement Motorized board
120/60cm (other lower values on request), speed 8cm/s
Motorized Lateral Movement
± 18cm, speed 6cm/s.
Equivalent filtration
0.55 mm Al at 100kVp
Radiolucent Area Width
60cm
Material Board
Carbon Fiber
Maximum Patient Weight (IEC 60-601-1)
230Kg without limitation, 310Kg with restrictions
Footrest width
40cm supported weight 230Kg
Automatic Tomography
Curvilinear tomography in one direction:
Three angles can be selected during installation from 8° to 40°.
Thickness of the cutting layer
1.5mm (at 40°), 3mm (at 20°), 6mm (at 10°)
Maximum Speed
0.5s for 10°, 1s for 20°, 2s for 40°.
Fulcrum height
From 0 to 300mm in steps of 1mm or 5mm. Automatic adjustment over the set height (increments and decrements) in the millimeters desired by the operator.
MOTORIZED RETRACTABLE COMPRESSION DEVICE (OPTIONAL)
Pallet compression
Up to 200N (130N factory programmed) with a maximum column angulation of ±10°.
Minimum distance to the board in compression
10cm
Patient Safety System
Inhibition of table top, spine and angulation movements during compression. In case of power failure on the table, if the patient is compressed, it can be released by a manual system.
Related Products
Omniscop FP
Digital surgical arch support for angiographic and traumatologic interventions.
Omniscop FPS
Surgical arch with touch and feel during surgeries in a mobile and compact system.
Polyrad Premium CSX
Automatic suspension with high precision movements and maximum versatility in radiographic studies.
